Wiki‎ > ‎

Ricoh Printer Setup on Linux

posted Mar 16, 2011, 3:57 PM by Dong Xu   [ updated Mar 19, 2011, 2:22 PM ]
by Matthew Caylor

Linux Network Printer for SUSE.

   1. Open yast in the console. This requires use of sudo.
   2. Go to Hardware → Printer
   3. Go to Print via Network then select Add
   4. Select Connection Wizard
   5. Select TCP Port (AppSocket/JetDirect)
   6. Enter the IP address of the printer and printer manufacturer, then hit ok.
       (For Ricoh, IP: 132.178.140.18, manufacturer: Ricoh)
   7. Select the driver for your specific printer then hit ok. (Ricoh Aficio MP 6000)
   8. Select the newly added printer and hit Print Test Page.
   9. Exit yast
Comments